Note:
- Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
- You will need an ATX PSU with at least 10 six-pin PCIe connectors. There are 3 six-pin PCIe connectors on each hashing board and all three need to be connected to the PSU for the hashing board to operate. Do not connect more than one PSU to the same hashing board. Bitmain recommends the APW3++ to power the V9.
- Separate power supply to control board: there is one additional six-pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10 PCIe connectors are connected to a power supply.
Parameters of ANTMINER V9 |
||
No. |
Parameters |
Value |
1 |
Product model |
V9 |
2 |
Hash chip type |
BM1580 |
3 |
Total quantity of hash chips |
135 PCS |
4 |
Total quantity of hash boards |
3 PCS |
5 |
Total hash rate |
4TH ±5% |
6 |
DC voltage input |
11.60~13.00 V |
7 |
DC current input @12V DC |
79.59 A +10% |
8 |
DC Power @12V DC input |
955 W +10% |
9 | 220VAC Power @25℃ ,93%
conversion efficiency of APW3 |
1027 W +10% |
10 | 220VAC Power efficiency @25℃,93% conversion efficiency of APW3 | 253mJ/MH+10% |
11 |
Weight(without package) |
3.05 kg |
12 |
Operation temperature |
0-40 ℃ |
13 |
Storage temperature |
-40-85 ℃ |
14 |
Operation humidity |
5%RH-95%RH,
prevent condensation |
15 |
Noise |
76 dB |
16 |
Networking connection mode |
Ethernet Cable |
17 |
Power connection mode |
All three PCI-E ports are required to power the board. You can use one PSU to power multiple boards, but do not attempt to power one board with two PSUs.We suggest to prevent the control board to be powered up before hash boards be powered up. |
18 |
Size(Length*Width*Hight,without package) |
301mm*123mm*155mm |
Reviews
There are no reviews yet.