Antminer L3++, 580MH/s Litecoin Miner
Shipping time: 1-10 July
- Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
- You will need an ATX PSU with at least 9 six-pin PCIE connectors. There are 2 PCI-e connectors for +12V DC input on each hashing board and both need to be connected to the PSU for the hashing board to operate. Do not connect more than one PSU to the same hashing board. Bitmain recommends the APW3++ to power the L3+
- Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 9 PCIE connectors are connected to power supply.
Product Description of L3+:
Scrypt Mining Hash Rate: 504MH/s (±7% is expected).
Power Consumption: 800W (±10%) at the wall (with Bitmain’s APW3 PSU, 93 percent efficiency, 25C ambient temp).
Power Efficiency: 1.6 J/MH at the wall (with Bitmain’s APW3 PSU).
Noise level: Loud. Not for desk-top use. Sounds like a vacuum.
Chip quantity per unit: 288 x BM1485.
Rated Voltage: 11.60 ~13.00V.
Operating Temperature: 0C to 40C.
Network Connection: Ethernet (cable not included).
Specifications of L3++ maybe slightly higher than L3+.
504MH/s (±7% is expected)
800W (±10%) at the wall (with Bitmain's APW3 PSU, 93 percent efficiency, 25C ambient temp)
1.6 J/MH at the wall (with Bitmain's APW3 PSU)
|Chip quantity per unit||
288 x BM1485
0C to 40C