Antminer S9j 14.5T
Shipping: September 11-20
1. Specifications and other information on the Antminer S9j are as mentioned below.
2. Please select the correct address for shipping before you submit your order because, for this batch, the shipping address and shipping method cannot be changed after the order has been submitted.
3.The shipping for this batch will start on a first-paid-first-ship basis for orders that we have received full payment for. We advise you to research and prepare in advance for the customs’ clearance in your country to avoid delays or unexpected costs.
4.Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
5. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!
6. The power cord is not included, please find one with at least 10A from your local market.
Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10x PCIE connectors are connected to power supply.
7. Kindly note that APW7 will be included for this bundle. Click here for specifications and other information on the APW7.
8. Please research on your local custom requirements before purchasing from Bitmain. In the case of any custom delay or shipment return due to the lack of certification, Minerhome will not be held liable.
|Reference power on wall, Watt,||1350±10%|
|Reference power efficiency on wall @25℃, J/TH||93.12±10%|
|Adapted AC/DC output requirement, Watt / Volt||1650 / 12.00|