Sale!
Category: Tags: ,

Antminer T9+, 10.5T

$810.00 $245.00

Shipping:September 11-20

PSU included

Compare

Note:

  • You will need an ATX PSU with at least 10 six-pin PCIe connectors. There are 3 six-pin PCIe connectors on each hashing board and all three need to be connected to the PSU for the hashing board to operate. Do not connect more than one PSU to the same hashing board. Bitmain recommends the APW3++ to power the T9+.
  • Separate power supply to control board: there is one additional six-pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10 PCIe connectors are connected to a power supply.

 

Parameters of ANTMINER T9+

No.

Parameters

Value

1

Product model

T9+_10.5T

2

Hash chip type

BM1387

3

Total quantity of hash chips

162 PCS

4

Total quantity of hash boards

3 PCS

5

Total hash rate

10.5 TH/s ±5%

6

DC voltage input

11.60~13.00 V

7

DC current input @12V DC input

111 A +7%

8

DC Power @12V DC input

1332 W +7%

9 220VAC Power @25℃ ,93%

conversion efficiency of APW3

1432 W +7%

10 220VAC Power efficiency @25℃,93% conversion efficiency of APW3  136mJ/GH+7%
11

Weight(without package)

 4.2 kg

12

Operation temperature

0-40 ℃

13

Storage temperature

-40-85 ℃

14

Operation humidity

5%RH-95%RH,prevent condensation
15

Noise

76 dB

16

Networking connection mode

Ethernet Cable

17

Power connection mode

All three PCI-E ports are required to power the board. You can use one PSU to power multiple boards, but do not attempt to power one board with two PSUs.We suggest to prevent  the control board to be powered up before hash boards be powered up.

18

Size(Length*Width*Hight,without package)

320mm*125mm*190mm

 

 

 

0.0

OVERALL

0% Complete
0% Complete
0% Complete
0% Complete
0% Complete

Reviews

There are no reviews yet.

Be the first to review “Antminer T9+, 10.5T”

Your email address will not be published. Required fields are marked *